Final Q Circuit Guide

Q-Technology Circuits User Guide with Q-Tape

 

Welcome to the Q-Technology Circuit Placement Guide with our Q-Tape. Follow these steps for proper and optimized application tailored to your body's needs.

 

 Necessary equipment

✅ Q-Technology Circuits
✅ Q-Tape (adhesive strap specific to our brand )
 ✅ Clean and dry skin

 

 General reminder on the reading direction of the logo

📍 Logo always visible and oriented for easy reading:

  • When the circuit is glued directly onto your own body , the logo must be readable to yourself (natural reading direction).
  • If you are adhering the circuit to your own sacrum or lower lumbar region (the posterior area that is difficult to see), orient the logo so that it is readable for someone else placing it in your place.

 

 Placement areas and reading direction

🔹 Under the arch of the foot (directly on the skin)

  • Place the circuit under each foot , between the Lisfranc and Chopart lines.
  • The logo must be legible and oriented in the normal reading direction , face against the arch of the foot (therefore invisible once placed).

 

 

🔹 In a pair of shoes (without direct gluing to the skin)

  • Customers who wish to place the circuits inside their shoes must use the same positioning and reading direction as for the arch of the foot:
    ✅ Circuit under the foot, legible logo and oriented in the normal reading direction.

 

 

🔹 On the back of the foot

  • Glue the circuit to the top of the foot, in the center of the dorsal area.
  • The logo must be legible and oriented for yourself (normal reading direction when looking at your foot).

 

 

🔹 At the level of the sacrum or lower lumbar region

  • Glue the circuit to the desired area on the lower back.
  • The logo must be readable for another person who would stick the circuit in your place (normal reading direction for a third party behind you).

 

 

🔹 At the level of the skull, in a cap

  • Glue the circuit to the inside of the cap, under the protective fabric strip, at a level fairly close to the pallet.
  • The logo must be readable from the inside .
  • Be careful, this area does not provide such predictable benefits for everyone and may make some people dizzy.

 

 

Q-Tape Application Instructions

1️ ⃣ Cleanse the skin to remove any traces of cream or moisture.
2️ ⃣ Peel off the Q-Tape , taking care not to touch the adhesive area.
3️ ⃣ Position the circuit according to the instructions above for the chosen area.
4️ ⃣ Firmly stick the Q-Tape over the circuit to hold it in place.
5️ ⃣ Smooth well to avoid creases or air bubbles.

 

 Important Precautions

⚠️ Do not stick Q-Tape to irritated or injured skin.
 ⚠️ If redness or discomfort occurs, remove the circuit and Q-Tape immediately.
⚠️ Change the Q-Tape as soon as it loses its adhesive power or becomes dirty.